OBJECTIVES

1. Monitors ADD’s and all other defects on Royal Jet Fleet and arrange for its rectification, including

arranging of spares and tooling at the earliest opportunity.

2. Monitor closely of operational problems related to the fleet, including significant occurrences/incidents, relevant

SB’s/SL’s/SIL’s.

3. Perform scheduled and unscheduled inspection, maintenance, modification, and defect rectification, carrying out all

maintenance in accordance with the laid down procedures and ensuring all safety precautions are observed.

4. Ensure and perform all maintenance and due items called up by Fleet Planner and MCC Controller in a timely manner.

5. Provide information to Duty Supervisor on the serviceability status of the aircraft.

6. Act as a point of contact on technical issues in case of AOG situation on one of the fleet and in conjunction with the MCC

Controller, to provide troubleshooting guidance and advice.

7. Supervise technicians and other maintenance workers on aircraft maintenance checks.

8. Ensure MEO and PPM are followed and complied with while working on the aircraft.

9. Exercise his license / approval in relation to the accomplishment of scheduled, unscheduled maintenance and rectification

of defects, to ensure maintenance are accomplished to the required standards.

10. Advise Duty Supervisor of any impending service disruptions, problems or areas of concern that may have an impact on

the operating program. Keeping the Duty Supervisor informed of all his work performed during his duty period.

11. Ensure staff under his immediate control adheres to published technical and safety requirements defined in MOE and

PPM.

12. Define priorities to the staff allocated to him to ensure that efficient use of resources are directed to an on time and safe

flight departure.

13. Ensure documentation and certification, are completed in a timely manner and to the defined procedures to meet Royal Jet

requirements.

14. Comply with Royal Jet MOE and PPM when working on aircraft and adhere to the procedure to ensure aircraft is released

to service in accordance with local authority and other civil authority requirement.

15. Report and compile technical Delay reports in a timely manner, reporting significant defects, discrepancies, incidents,

accidents and events as required by the PPM.

16. Ensures he or his Mechanics presence on arriving aircrafts and crews are suitably debriefed to ensure defects are

accurately defined, and recorded.

17. Perform other related duties as may be reasonably directed by the Duty Supervisor or Senior Manager Aircraft

Maintenance.

18. Reports to Maintenance Control Center- Controller / Manager when away from Base Act as a point of contact on technical

issues in case of AOG situation on one of the fleet and in conjunction with the MCC Controller, to provide troubleshooting

guidance and advice when away from Abu Dhabi Base.

19. Liaison with third party agents, where necessary for the safe handling/engineering operation of Royal Jet aircraft while out

from Abu Dhabi base.

20 Act as Technical Representative while Royal Jet aircraft are at outside contractor’s facilities.

21. Ensure aircraft are positioned on-stand and technically prepared for intended operation and repositioned to the

hangar/parking, as necessary, after operation.

22. If operation requires, he will accompany aircraft as a flying LAE for line inspections, maintenance functions and defects

rectification en route, ensuring a quick and smooth turnarounds without disruptions to flight operation services.

23. Contribute as part of the team when away from base, duties including acting as a focal point on technical matters,

performing the duties of an “able bodied person” during an emergency situation and supervise cargo loading in the

absence of a loadmaster on a flight.

24. Provide information to Duty Supervisor on the serviceability status of the aircraft.

25.Monitor own licenses and authorizations to ensure they are valid at all times.

26. Monitor and ensure all required visas for essential countries are valid

27. Monitor modification status of the aircraft he is authorized on, including Technical Notices, Quality Directives, and MOE &

PPM. Carry out research and inquiries with Technical Records & Engineering, computer system and read all relevant

documents, instructions, and manuals thus keeping current of all technical, procedural, and regulatory developments.

28. The Licensed Aircraft Engineer reports to the Maintenance Manager. Duty Supervisor, MCC controller (when functioning as

Flying Licensed Engineer).

29. Respond to SMS messages from Crew Scheduling and report to duty as per instructions from Crew Scheduling officer.

Report to duty at Operation 2 hours 30 minutes before departure time.

30. To be present at the aircraft 2 hours before departure.

Skills

Formal Education Required:

Educated to a degree level in Aeronautical Engineering

Related Professional Training, Certification or Membership:

Mandatory

Valid UAE GCAA License, B1 & B2 License

Preferred

Full rating on at least two type of aircraft operated by Royal Jet (Global 5000/6000 and Boeing NG 737)

Familiarity with the EASA/FAA/UAE GCAA regulatory rules and requirements

Years & Field of Experience required:

10 Years’ experience in Aircraft Maintenance, 5 years of which as a Licensed Aircraft Engineer, preferably in a VVIP Maintenance environment.